For maximum bulk reduction, choose the Intimus 16.87 shredder baler combination. The combo system shreds and automatically compacts the waste into easy to handle bales.
How the Intimus 16.87 Shredder Baler Operates:
The system is so user friendly it operates on a continuous basis. You can even continue to load waste materials for shredding while the baler is compressing the shredded particles.When the bale is complete, an audible signal indicates it is time for removal. The compress bale is bound with two straps and simply ejected directly into to a plastic bag for dust free removal and storage.
All models are equipped with a safety system
- Wide Emergency Stop Bar for immediate stop
- Safety Switch for the Ejector Opening and Press Feed Flap
- Safety Interlock at the bale ejection flap
- Key Switch for Main Power
- Motor Protection Device
The particles of paperwork shredded in accordance with the requirements of data security drop into the compacting chamber of the 8 ton hydraulic baler. The cutting mechanism can continue to be loaded while the baler is compressing the shredded material. The data shredder and the baler are operated in a continuous cycle.An audible signal indicates when the bale is completed. The compresses bale is then bound with two straps and simply ejected from the compacting chamber by a pushbutton control. Alternatively, the bale can also be ejected directly into an environmentally compatible plastic sack. The advantages are stable bales and dustfree handling. Shreds with a practical capacity of 1500 pounds per hour. Equipped with overload protection and casters.
Operation of the Intimus 16.87 Shredder:
1) Insert the enclosed key into the key switch and turn clockwise 2) Operate the mains switch to position 1. After a delay of 2 seconds the "ready" and "ram at rear" indicator lights come on. 3) Operate the cutter forward pushbutton. The cutter and conveyor belt start. The light of the cutter forward display comes on.
Note: if when the shredder is started the baling ram of the baler is not in its basic position (rearmost position), a compression stroke with the following return stroke is carried out automatically before the cutter and conveyor belt start
.