Seals mail pieces with an adhesive tab to create mailings that comply with U.S. postal requirements. Reduces cost of mailings by eliminating the need for envelopes. Accepts rolls of up to 5,000 tabs. Precision control of tab location. Built-in diagonostics for easy service.
Operation
Operation of the unit is simple. There is only one adjustment that can be made electronically; this is in regard to how much of the tab is peeled off the peel bar each time. Ideally, the tab should be around 2/3 peeled, but as much as 7/8 may be necessary, depending on the stock that is being ran (8 x 11, 8 x 14, 3 x 5 etc.). The thickness of the stock can be a consideration. The machine applies tabs to 1,2 and 3 page sets in about the same manner. To go any thicker would definitely be an adjustment to the machines peel value. The peel adjustment comes preset from the factory to apply tabs to a typical 8 x 11 tri-fold application (single ply). Peel value leaving the factory is typically set somewhere between 4-6.
- Minimum Media Size: 5" wide
- Maximum Media Size: 12" wide
- Maximum Media Thickness: 1/8"
- Speed: 7,500 pieces per hour
- Acceptable Tabs: Accepts 15/16" and 31/32" round and 7/8" square tabs with either friction or tractor fed backing. Not recommended for use with clear tabs
- Electrical: 115V, 60Hz
- Dimensions: 20" x 21" x 17"
- Weight: 40 Pounds